Altec Lansing Octiv 650 User's Guide download pdf (Page 17)

Troubleshooting

Symptom Possible Problem Solution

No sound from the

AUX device, such as

an MP3 player or CD

player connected to

the AUX jack

Cable is not properly connected to

the source or the speaker system.

Ensure the cable is properly connected between the source and the Octiv650 speaker

system.

Volume on the device is set

toolow.

Increase the volume on the device to approximately ¾ full volume.

The speaker system

exhibits erratic or

unexpected behavior;

controls do not

function

Static electricity, momentary

interruption of power or abnormal

operating conditions may be

responsible.

1. Remove your iPhone or iPod.

2. Disconnect the AC adapter cable plug from the speaker system’s jack.

3. Wait 20 – 30 seconds.

4. While you wait, reset your iPhone or iPod.

5. Reconnect the AC adapter cable plug to the speaker system’s jack.

6. Turn on the speaker system and check for erratic behavior. For example, adjust the

volume and see if the LEDs change.

7. If the speaker system still exhibits erratic behavior (for example, the LEDs do not

change as you adjust the volume), restore the unit’s factory defaults:

A. Ensure that your Octiv650 speaker system is powered on.

B. Press and hold the

button on the speaker system until the Power LED stops

ﬂashing.

8. Reinstall your iPhone or iPod on the dock.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 71 72

No comments

Altec Lansing Octiv 650 User's Guide Page 17