Altec Lansing 9444B User Manual Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 19
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
5
Parking
One tour related vehicle will be allowed to park on our loading dock as long as it does not impede access to the
fire department access door, which is located about half way down the dock. Parking for other tour related
vehicles will be on Canal Street, which runs along the south side of the building, adjacent to the loading dock.
Please inform the staff as to how many and what types of vehicles are traveling with the production. We will
then reserve sufficient space in advance.
Shore Power: 2 x 120/208 V 3 phase, 100 A/leg, tie in for tails located immediately inside loading dock door.
Both disconnects are wired with a 50A NEMA 14-50R receptacle.
Directions
From the North:
State Road 15: continue south on 15 into town, turn right (west) on Market which
is the first stop light after the railroad track. The center is on the left side.*
State Road 13: continue south on 13 into town, turn right (west) on Market which
is the first stop light after the railroad track. The center is 2.5 blocks west on
the left side.*
From the South:
State Roads 15 and 13: State Roads 15 and 13 come into town on S. Wabash street.
Turn left (west) on Market St., which is State Road 15, and is the second stop light
after you cross the Wabash River. The Center is 2.5 blocks west on the left side.*
From the West:
Highway 24: stay on 24 to State Road 15. Turn right (south) on State Road 15.
Take State Road 15 to Market Street, which is the first stoplight after you cross the
railroad tracks. Turn right on Market Street. The Center is on the left.*
From the East:
Highway 24: stay on 24 to State Road 13. Turn left on 13 south into town. Turn right
(west) on Market Street, which is the first stoplight after the railroad tracks.
The Center is 2.5 blocks west on the left side.*
*Please Note: All routes end in westward travel on Market Street. Please turn left at the intersection
immediately following the Center. This Carroll Street. The next street that you will encounter is a one way
street heading east. This is Canal Street, which is the street on which our loading dock is located.
IN ORDER TO BACK A TRAILER INTO THE DOCK, YOU MUST BE FACING THE WRONG
DIRECTION ON CANAL STREET. You may wish to turn right at the intersection of Carroll and Canal,
AGAINST the one-way, and back towards the dock. Please feel free to ask the Honeywell crew for traffic
assistance if needed.
Load-In Area
Dimensions: The loading surface of the dock is 47” (1.2m) high, 15’ 9” (4.8m) wide. One truck can be
accommodated at a time. The loading dock door is 8’w x 12’h and opens into Sub Assembly (50’ x
25’(15.2m x 7.6m)). From Sub Assembly to the stage is an unobstructed roll with a height and width
limitations set by two fire doors, both of which measure 14’x14’ (4.2m x 4.2m).
Page view 4
1 2 3 4 5 6 7 8 9 10 ... 18 19

Comments to this Manuals

No comments